@article {Array, title = {3. Binary Solvent Additives Treatment Boosts the Efficiency of PTB7:PCBM Polymer Solar Cells to Over 9.5\%}, journal = {Solar RRL}, volume = {2}, year = {2018}, month = {Jan-04-2018}, pages = {1700144}, doi = {10.1002/solr.v2.410.1002/solr.201700144}, url = {http://doi.wiley.com/10.1002/solr.v2.4http://doi.wiley.com/10.1002/solr.201700144http://onlinelibrary.wiley.com/wol1/doi/10.1002/solr.201700144/fullpdfhttps://api.wiley.com/onlinelibrary/tdm/v1/articles/10.1002\%2Fsolr.201700144}, author = {Zheng, Yifan and Wang, Gang and Huang, Di and Kong, Jaemin and Goh, Tenghooi and Huang, Wei and Yu, Junsheng and Taylor, Andr{\'e} D.} } @article {Array, title = {5. PEOz-PEDOT:PSS Composite Layer: A Route to Suppressed Hysteresis and Enhanced Open-Circuit Voltage in Planar Perovskite Solar Cell}, journal = {ACS Applied Materials \& Interfaces}, year = {2018}, month = {Jan-06-2020}, issn = {1944-8244}, doi = {10.1021/acsami.8b05949}, url = {http://pubs.acs.org/doi/10.1021/acsami.8b05949http://pubs.acs.org/doi/pdf/10.1021/acsami.8b05949}, author = {Huang, Di and Goh, Tenghooi and McMillon-Brown, Lyndsey and Kong, Jaemin and Zheng, Yifan and Zhao, Jiao and Li, Yang and Zhao, Suling and Xu, Zheng and Taylor, Andr{\'e} D.} } @article {Array, title = {2. Perovskite solar cells with a DMSO-treated PEDOT:PSS hole transport layer exhibit higher photovoltaic performance and enhanced durability}, journal = {Nanoscale}, volume = {9}, year = {2017}, month = {Jan-01-2017}, pages = {4236 - 4243}, issn = {2040-3364}, doi = {10.1039/C6NR08375G}, url = {http://xlink.rsc.org/?DOI=C6NR08375Ghttp://pubs.rsc.org/en/content/articlepdf/2017/NR/C6NR08375G}, author = {Huang, Di and Goh, Tenghooi and Kong, Jaemin and Zheng, Yifan and Zhao, Suling and Xu, Zheng and Taylor, Andr{\'e} D.} } @article {Array, title = {3. Colorful polymer solar cells employing an energy transfer dye molecule}, journal = {Nano Energy}, volume = {38}, year = {2017}, month = {Jan-08-2017}, pages = {36 - 42}, issn = {22112855}, doi = {10.1016/j.nanoen.2017.05.032}, url = {http://linkinghub.elsevier.com/retrieve/pii/S221128551730304Xhttp://api.elsevier.com/content/article/PII:S221128551730304X?httpAccept=text/xmlhttp://api.elsevier.com/content/article/PII:S221128551730304X?httpAccept=text/plain}, author = {Kong, Jaemin and Mohadjer Beromi, Megan and Mariano, Marina and Goh, Tenghooi and Antonio, Francisco and Hazari, Nilay and Taylor, Andr{\'e} D.} } @article {Array, title = {4. Exploring a wider range of Mg-Ca-Zn metallic glass as biocompatible alloys using combinatorial sputtering}, journal = {Chem. Commun.}, year = {2017}, month = {Jan-01-2017}, issn = {1359-7345}, doi = {10.1039/C7CC02733H}, url = {http://xlink.rsc.org/?DOI=C7CC02733Hhttp://pubs.rsc.org/en/content/articlepdf/2017/CC/C7CC02733H}, author = {Li, Jinyang and Gittleson, Forrest S. and Liu, Yanhui and Liu, Jingbei and Loye, Ayomiposi M. and McMillon-Brown, Lyndsey and Kyriakides, Themis R. and Schroers, Jan and Taylor, Andr{\'e} D.} } @article {Array, title = {B 10. An additive dripping technique using diphenyl ether fortuning perovskite crystallization for high-efficiency solar cells}, journal = {Nano Research}, year = {2017}, month = {Aug-12-2018}, issn = {1998-0124}, doi = {10.1007/s12274-017-1894-7}, url = {http://link.springer.com/10.1007/s12274-017-1894-7http://link.springer.com/content/pdf/10.1007/s12274-017-1894-7.pdfhttp://link.springer.com/content/pdf/10.1007/s12274-017-1894-7.pdfhttp://link.springer.com/article/10.1007/s12274-017-1894-7/fulltext.html}, author = {Huang, Di and Goh, Tenghooi and Zheng, Yifan and Qin, Zilun and Zhao, Jiao and Zhao, Suling and Xu, Zheng and Taylor, Andr{\'e} D.} } @article {Array, title = {1. Heme biomolecule as redox mediator and oxygen shuttle for efficient charging of lithium-oxygen batteries}, journal = {Nature Communications}, volume = {7}, year = {2016}, month = {Jul-10-2017}, pages = {12925}, doi = {10.1038/ncomms12925}, url = {http://www.nature.com/doifinder/10.1038/ncomms12925}, author = {Ryu, Won-Hee and Gittleson, Forrest S. and Thomsen, Julianne M. and Li, Jinyang and Schwab, Mark J. and Brudvig, Gary W. and Taylor, Andr{\'e} D.} } @article {Array, title = {3. Solution-processed Titanium Carbide MXene films examined as highly transparent conductors}, journal = {Nanoscale}, year = {2016}, month = {08/2016}, issn = {2040-3364}, doi = {10.1039/C6NR03682A}, url = {http://pubs.rsc.org/en/Content/ArticleLanding/2016/NR/C6NR03682A}, author = {Mariano, Marina and Mashtalir, O. and Antonio, Francisco and Ryu, Won-Hee and Deng, Bingchen and Xia, Fengnian and Gogotsi, Yury and Taylor, Andre} } @article {Array, title = {4. A New Design Strategy for Observing Lithium Oxide Growth-Evolution Interactions Using Geometric Catalyst Positioning}, journal = {Nano Letters}, year = {2016}, month = {May-07-2016}, issn = {1530-6984}, doi = {10.1021/acs.nanolett.6b00856}, url = {http://pubs.acs.org/doi/abs/10.1021/acs.nanolett.6b00856}, author = {Ryu, Won-Hee and Gittleson, Forrest S. and Li, Jinyang and Tong, Xiao and Taylor, {\'e} D.} } @article {Array, title = {5. Quaternary Organic Solar Cells Enhanced by Cocrystalline Squaraines with Power Conversion Efficiencies >10\%}, journal = {Advanced Energy Materials}, year = {2016}, month = {Aug-05-2016}, pages = {1600660}, doi = {10.1002/aenm.201600660}, url = {http://doi.wiley.com/10.1002/aenm.201600660http://api.wiley.com/onlinelibrary/tdm/v1/articles/10.1002\%2Faenm.201600660}, author = {Goh, Tenghooi and Huang, Jing-Shun and Yager, Kevin G. and Sfeir, Matthew Y. and Nam, Chang-Yong and Tong, Xiao and Guard, Louise M. and Melvin, Patrick R. and Antonio, Francisco and Bartolome, Benjamin G. and Lee, Minjoo L. and Hazari, Nilay and Taylor, A D..} } @article {Array, title = {6. Toward Efficient Thick Active PTB7 Photovoltaic Layers Using Diphenyl Ether as a Solvent Additive}, journal = {ACS Applied Materials \& Interfaces}, volume = {8}, year = {2016}, month = {Oct-06-2017}, pages = {15724 - 15731}, issn = {1944-8244}, doi = {10.1021/acsami.6b03453}, url = {http://pubs.acs.org/doi/abs/10.1021/acsami.6b03453}, author = {Zheng, Yifan and Goh, Tenghooi and Fan, Pu and Shi, Wei and Yu, Junsheng and Taylor, A. D.} } @article {Array, title = {8. Pt and Pd catalyzed oxidation of Li 2 O 2 and DMSO during Li{\textendash}O 2 battery charging}, journal = {Chem. Commun.}, volume = {52}, year = {2016}, month = {Jan-01-2016}, pages = {6605 - 6608}, issn = {1359-7345}, doi = {10.1039/C6CC01778A}, url = {http://xlink.rsc.org/?DOI=C6CC01778A}, author = {Gittleson, Forrest S. and Ryu, Won-Hee and Schwab, Mark and Tong, Xiao and Taylor, A. D.} } @article {Array, title = {9. Toward Microcapsule-Embedded Self-Healing Membranes}, journal = {Environmental Science \& Technology Letters}, year = {2016}, month = {Jul-03-2016}, issn = {2328-8930}, doi = {10.1021/acs.estlett.6b00046}, url = {http://pubs.acs.org/doi/abs/10.1021/acs.estlett.6b00046}, author = {Kim, Sang-Ryoung and Getachew, Bezawit A. and Park, Seon-Joo and Kwon, Oh-Seok and Ryu, Won-Hee and Taylor, {\'e} D. and Bae, Joonwon and Kim, Jae-Hong} } @article {Array, title = {B2. Electrocatalysts: Guided Evolution of Bulk Metallic Glass Nanostructures: A Platform for Designing 3D Electrocatalytic Surfaces (Adv. Mater. 10/2016)}, journal = {Advanced Materials}, volume = {28}, year = {2016}, month = {Jan-03-2016}, pages = {1902 - 1902}, doi = {10.1002/adma.201504504}, url = {http://doi.wiley.com/10.1002/adma.v28.10http://doi.wiley.com/10.1002/adma.201670064http://api.wiley.com/onlinelibrary/tdm/v1/articles/10.1002\%2Fadma.201670064}, author = {Doubek, Gustavo and Sekol, Ryan C. and Li, Jinyang and Ryu, Won-Hee and Gittleson, Forrest S. and Nejati, Siamak and Moy, Eric and Reid, Candy and Carmo, Marcelo and Linardi, Marcelo and Bordeenithikasem, Punnathat and Kinser, Emily and Liu, Yanhui and Tong, Xiao and Osuji, Chinedum O. and Schroers, Jan and Mukherjee, Sundeep and Taylor, {\'e} D.} } @article {66, title = {Coevaporated Bisquaraine Inverted Solar Cells: Enhancement Due to Energy Transfer and Open Circuit Voltage Control}, journal = {ACS PhotonicsACS Photonics}, volume = {2}, number = {1}, year = {2015}, pages = {86-95}, isbn = {2330-4022
2330-4022}, doi = {10.1021/ph500282z}, author = {Goh, Tenghooi and Huang, Jing-Shun and Bielinski, Elizabeth A. and Thompson, Bennett A. and Tomasulo, Stephanie and Lee, Minjoo L. and Sfeir, Matthew Y. and Hazari, Nilay and Taylor, Andr{\'e} D.} } @article {88, title = {Enhanced photoelectrochemical and sensing performance of novel TiO2 arrays to H2O2 detection}, journal = {Chemical Sensors and Actuators B}, volume = {211}, year = {2015}, pages = {111-115}, isbn = {09254005}, doi = {10.1016/j.snb.2015.01.060}, author = {Yu, Lianqing and Zhang, Yaping and Zhi, Qianqian and Wang, Qingqing and Gittleson, Forrest S. and Li, Jinyang and Taylor, Andr{\'e} D.} } @article {78, title = {A high power density miniaturized microbial fuel cell having carbon nanotube anodes}, journal = {Journal of Power Sources}, volume = {273}, year = {2015}, pages = {823-830}, isbn = {03787753}, doi = {10.1016/j.jpowsour.2014.09.165}, author = {Ren, Hao and Pyo, Soonjae and Lee, Jae-Ik and Park, Tae-Jin and Gittleson, Forrest S. and Leung, Frederick C. C. and Kim, Jongbaeg and Taylor, Andr{\'e} D. and Lee, Hyung-Sool and Chae, Junseok} } @article {79, title = {A mesoporous catalytic membrane architecture for lithium-oxygen battery systems}, journal = {Nano LettNano Lett}, volume = {15}, number = {1}, year = {2015}, note = {Ryu, Won-Hee
Gittleson, Forrest S
Schwab, Mark
Goh, Tenghooi
Taylor, Andre D
eng
Research Support, Non-U.S. Gov{\textquoteright}t
Research Support, U.S. Gov{\textquoteright}t, Non-P.H.S.
2014/12/30 06:00
Nano Lett. 2015 Jan 14;15(1):434-41. doi: 10.1021/nl503760n. Epub 2014 Dec 30.}, month = {Jan 14}, pages = {434-41}, abstract = {

Controlling the mesoscale geometric configuration of catalysts on the oxygen electrode is an effective strategy to achieve high reversibility and efficiency in Li-O2 batteries. Here we introduce a new Li-O2 cell architecture that employs a catalytic polymer-based membrane between the oxygen electrode and the separator. The catalytic membrane was prepared by immobilization of Pd nanoparticles on a polyacrylonitrile (PAN) nanofiber membrane and is adjacent to a carbon nanotube electrode loaded with Ru nanoparticles. During oxide product formation, the insulating PAN polymer scaffold restricts direct electron transfer to the Pd catalyst particles and prevents the direct blockage of Pd catalytic sites. The modified Li-O2 battery with a catalytic membrane showed a stable cyclability for 60 cycles with a capacity of 1000 mAh/g and a reduced degree of polarization ( approximately 0.3 V) compared to cells without a catalytic membrane. We demonstrate the effects of a catalytic membrane on the reaction characteristics associated with morphological and structural features of the discharge products via detailed ex situ characterization.

}, keywords = {catalyst, electrospinning, Lithium-oxygen batteries, mesoporous polymer membrane, oxygen evolution reaction}, isbn = {1530-6992 (Electronic)
1530-6984 (Linking)}, doi = {10.1021/nl503760n}, author = {Ryu, W. H. and Gittleson, F. S. and Schwab, M. and Goh, T. and Taylor, A. D.} } @article {83, title = {Nanoimprinting sub-100 nm features in a photovoltaic nanocomposite using durable bulk metallic glass molds}, journal = {ACS Appl Mater InterfacesACS Appl Mater Interfaces}, volume = {7}, number = {6}, year = {2015}, note = {Singer, Jonathan P
Gopinadhan, Manesh
Shao, Zhen
Taylor, Andre D
Schroers, Jan
Osuji, Chinedum O
eng
Letter
Research Support, Non-U.S. Gov{\textquoteright}t
Research Support, U.S. Gov{\textquoteright}t, Non-P.H.S.
2015/02/03 06:00
ACS Appl Mater Interfaces. 2015 Feb 18;7(6):3456-61. doi: 10.1021/am507368g. Epub 2015 Feb 5.}, month = {Feb 18}, pages = {3456-61}, abstract = {

The use of bulk metallic glass (BMG) for the nanoimprint of high-aspect-ratio (\>3) features into functional polymers is investigated. To accomplish this, the most critical aspect is the successful demolding of the imprinted polymer. By fluorosilane functionalization of the BMG surface and optimization of processing temperature, high aspect pore features down to 45 nm diameters are introduced into the surface of two organic photovoltaic systems: poly(3-hexylthiophene-2,5-diyl) (P3HT) and 1:1 mixtures of P3HT with Phenyl-C61-butyric acid methyl ester (PCBM). The crystallinity of P3HT demands higher forming temperatures and pressures that are difficult to obtain with conventional soft nanoimprint lithography molds. The ability to accommodate a wide range of processing conditions and the low cost of fabricating molds with nanometer-scale features point to the large potential of nanotextured BMGs as an economical and scalable imprint material for high-resolution applications.

}, keywords = {bulk heterojunctions, bulk metallic glass, nanoimprint lithography, organic photovoltaics, polymer patterning}, isbn = {1944-8252 (Electronic)
1944-8244 (Linking)}, doi = {10.1021/am507368g}, author = {Singer, J. P. and Gopinadhan, M. and Shao, Z. and Taylor, A. D. and Schroers, J. and Osuji, C. O.} } @article {Array, title = {Panchromatic polymer{\textendash}polymer ternary solar cells enhanced by F{\"o}rster resonance energy transfer and solvent vapor annealing}, journal = {J. Mater. Chem. A}, volume = {3}, year = {2015}, month = {Jan-01-2015}, pages = {18611 - 18621}, issn = {2050-7488}, doi = {10.1039/C5TA04905A}, url = {http://xlink.rsc.org/?DOI=C5TA04905A}, author = {Goh, Tenghooi and Huang, Jing-Shun and Bartolome, Benjamin and Sfeir, Matthew Y. and Vaisman, Michelle and Lee, Minjoo L. and Taylor, A D.} } @article {Array, title = {Raman Spectroscopy in Lithium-Oxygen Battery Systems}, journal = {ChemElectroChem}, volume = {2}, year = {2015}, month = {Jan-10-2015}, pages = {1446 - 1457}, doi = {10.1002/celc.v2.1010.1002/celc.201500218}, url = {http://doi.wiley.com/10.1002/celc.v2.10http://doi.wiley.com/10.1002/celc.201500218http://api.wiley.com/onlinelibrary/tdm/v1/articles/10.1002\%2Fcelc.201500218}, author = {Gittleson, Forrest S. and Yao, Koffi P. C. and Kwabi, David G. and Sayed, Sayed Youssef and Ryu, Won-Hee and Shao-Horn, Yang and Taylor, A. D.} } @article {Array, title = {Ultrathin Nanotube/Nanowire Electrodes by Spin{\textendash}Spray Layer-by-Layer Assembly: A Concept for Transparent Energy Storage}, journal = {ACS Nano}, volume = {9}, year = {2015}, month = {Mar-10-2017}, pages = {10005 - 10017}, issn = {1936-0851}, doi = {10.1021/acsnano.5b03578}, url = {http://pubs.acs.org/doi/10.1021/acsnano.5b03578http://pubs.acs.org/doi/pdf/10.1021/acsnano.5b03578}, author = {Gittleson, Forrest S. and Hwang, Daniel and Ryu, Won-Hee and Hashmi, Sara M. and Hwang, Jonathan and Goh, Tenghooi and Taylor, A. D.} } @article {65, title = {Catalyst and electrolyte synergy in Li-O2 batteries}, journal = {Phys Chem Chem PhysPhys Chem Chem Phys}, volume = {16}, number = {7}, year = {2014}, note = {Gittleson, Forrest S
Sekol, Ryan C
Doubek, Gustavo
Linardi, Marcelo
Taylor, Andre D
eng
England
2014/01/11 06:00
Phys Chem Chem Phys. 2014 Feb 21;16(7):3230-7. doi: 10.1039/c3cp54555e. Epub 2014 Jan 10.}, month = {Feb 21}, pages = {3230-7}, abstract = {

Understanding the interactions between catalyst and electrolyte in Li-O2 systems is crucial to improving capacities, efficiencies, and cycle life. In this study, supported noble metal catalysts Pt/C, Pd/C, and Au/C were paired with popular Li-O2 electrolyte solvents dimethoxyethane (DME), tetraglyme (TEGDME), and dimethyl sulfoxide (DMSO). The effects of these combinations on stability, kinetics, and activity were assessed. We show evidence of a synergistic effect between Pt and Pd catalysts and a DMSO-based electrolyte which enhances the kinetics of oxygen reduction and evolution reactions. DME and TEGDME are more prone to decomposition and less kinetically favorable for oxygen reduction and evolution than DMSO. While the order of oxygen reduction onset potentials with each catalyst was found to be consistent across electrolyte (Pd \> Pt \> Au), larger overpotentials with DME and TEGDME, and negative shifts in onset after only five cycles favor the stability of a DMSO electrolyte. Full cell cycling experiments confirm that catalyst-DMSO combinations produce up to 9 times higher discharge capacities than the same with TEGDME after 20 cycles ( approximately 707.4 vs. 78.8 mA h g(-1) with Pd/C). Ex situ EDS and in situ EIS analyses of resistive species in the cathode suggest that improvements in capacity with DMSO are due to a combination of greater electrolyte conductivity and catalyst synergies. Our findings demonstrate that co-selection of catalyst and electrolyte is necessary to exploit chemical synergies and improve the performance of Li-O2 cells.

}, isbn = {1463-9084 (Electronic)
1463-9076 (Linking)}, doi = {10.1039/C3CP54555E}, author = {Gittleson, F. S. and Sekol, R. C. and Doubek, G. and Linardi, M. and Taylor, A. D.} } @article {70, title = {Controlled doping of carbon nanotubes with metallocenes for application in hybrid carbon nanotube/Si solar cells}, journal = {Nano LettNano Lett}, volume = {14}, number = {6}, year = {2014}, note = {Li, Xiaokai
Guard, Louise M
Jiang, Jie
Sakimoto, Kelsey
Huang, Jing-Shun
Wu, Jianguo
Li, Jinyang
Yu, Lianqing
Pokhrel, Ravi
Brudvig, Gary W
Ismail-Beigi, Sohrab
Hazari, Nilay
Taylor, Andre D
eng
Research Support, Non-U.S. Gov{\textquoteright}t
Research Support, U.S. Gov{\textquoteright}t, Non-P.H.S.
2014/05/02 06:00
Nano Lett. 2014 Jun 11;14(6):3388-94. doi: 10.1021/nl500894h. Epub 2014 May 13.}, month = {Jun 11}, pages = {3388-94}, abstract = {

There is considerable interest in the controlled p-type and n-type doping of carbon nanotubes (CNT) for use in a range of important electronics applications, including the development of hybrid CNT/silicon (Si) photovoltaic devices. Here, we demonstrate that easy to handle metallocenes and related complexes can be used to both p-type and n-type dope single-walled carbon nanotube (SWNT) thin films, using a simple spin coating process. We report n-SWNT/p-Si photovoltaic devices that are \>450 times more efficient than the best solar cells of this type currently reported and show that the performance of both our n-SWNT/p-Si and p-SWNT/n-Si devices is related to the doping level of the SWNT. Furthermore, we establish that the electronic structure of the metallocene or related molecule can be correlated to the doping level of the SWNT, which may provide the foundation for controlled doping of SWNT thin films in the future.

}, isbn = {1530-6992 (Electronic)
1530-6984 (Linking)}, doi = { 10.1021/nl500894h}, author = {Li, X. and Guard, L. M. and Jiang, J. and Sakimoto, K. and Huang, J. S. and Wu, J. and Li, J. and Yu, L. and Pokhrel, R. and Brudvig, G. W. and Ismail-Beigi, S. and Hazari, N. and Taylor, A. D.} } @article {72, title = {Device Area Scale-Up and Improvement of SWNT/Si Solar Cells Using Silver Nanowires}, journal = {Advanced Energy MaterialsAdvanced Energy Materials}, volume = {4}, number = {12}, year = {2014}, pages = {n/a-n/a}, isbn = {16146832}, doi = {10.1002/aenm.201400186}, author = {Li, Xiaokai and Jung, Yeonwoong and Huang, Jing-Shun and Goh, Tenghooi and Taylor, Andr{\'e} D.} } @article {64, title = {Operando observation of the gold-electrolyte interface in Li-O2 batteries}, journal = {ACS Appl Mater InterfacesACS Appl Mater Interfaces}, volume = {6}, number = {21}, year = {2014}, note = {Gittleson, Forrest S
Ryu, Won-Hee
Taylor, Andre D
eng
Research Support, Non-U.S. Gov{\textquoteright}t
Research Support, U.S. Gov{\textquoteright}t, Non-P.H.S.
2014/10/16 06:00
ACS Appl Mater Interfaces. 2014 Nov 12;6(21):19017-25. doi: 10.1021/am504900k. Epub 2014 Oct 31.}, month = {Nov 12}, pages = {19017-25}, abstract = {

Observing the cathode interface in Li-O2 batteries during cycling is necessary to improve our understanding of discharge product formation and evolution in practical cells. In this work a gold electrode surface is monitored by operando surface-enhanced Raman spectroscopy during typical discharge and charge cycling. During discharge, we observe the precipitation of stable and reversible lithium superoxide (LiO2), in contrast to reports that suggest it is a mere intermediate in the formation of lithium peroxide (Li(2)O2). Some LiO2 is further reduced to Li(2)O2 producing a coating of insulating discharge products that renders the gold electrode inactive. Upon charging, a superficial layer of these species ( approximately 1 nm) are preferentially oxidized at low overpotentials (\<0.6 V), leaving residual products in poor contact with the electrode surface. In situ electrochemical impedance spectroscopy is also used to distinguish between LiO2 and Li(2)O2 products using frequency-dependent responses and to correlate their reduction and oxidation potentials to the accepted mechanism of Li(2)O2 formation. These operando and in situ studies of the oxygen electrode interface, coupled with ex situ characterization, illustrate that the composition of discharge products and their proximity to the catalytic surface are important factors in the reversibility of Li-O2 cells.

}, keywords = {electrochemical impedance spectroscopy, Li2O2, LiO2, lithium-air, lithium-oxygen, Raman spectroscopy, Sers}, isbn = {1944-8252 (Electronic)
1944-8244 (Linking)}, doi = {10.1021/am504900k}, author = {Gittleson, F. S. and Ryu, W. H. and Taylor, A. D.} } @article {Array, title = {Toward Tailored Functional Design of Multi-Walled Carbon Nanotubes (MWNTs): Electrochemical and Antimicrobial Activity Enhancement via Oxidation and Selective Reduction}, journal = {Environmental Science \& Technology}, volume = {48}, year = {2014}, month = {Aug-05-2015}, pages = {5938 - 5945}, issn = {0013-936X}, doi = {10.1021/es500468y}, url = {http://pubs.acs.org/doi/abs/10.1021/es500468y}, author = {Gilbertson, Leanne M. and Goodwin, David G. and Taylor, A. D. and Pfefferle, Lisa and Zimmerman, Julie B.} } @article {81, title = {Bulk metallic glass micro fuel cell}, journal = {SmallSmall}, volume = {9}, number = {12}, year = {2013}, note = {Sekol, Ryan C
Kumar, Golden
Carmo, Marcelo
Gittleson, Forrest
Hardesty-Dyck, Nathan
Mukherjee, Sundeep
Schroers, Jan
Taylor, Andre D
eng
Research Support, U.S. Gov{\textquoteright}t, Non-P.H.S.
Germany
2012/11/28 06:00
Small. 2013 Jun 24;9(12):2081-5, 2026. doi: 10.1002/smll.201201647. Epub 2012 Nov 26.}, month = {Jun 24}, pages = {2081-5, 2026}, isbn = {1613-6829 (Electronic)
1613-6810 (Linking)}, doi = {10.1002/smll.201201647}, author = {Sekol, R. C. and Kumar, G. and Carmo, M. and Gittleson, F. and Hardesty-Dyck, N. and Mukherjee, S. and Schroers, J. and Taylor, A. D.} } @article {Array, title = {Finite size effects in the crystallization of a bulk metallic glass}, journal = {Applied Physics Letters}, volume = {103}, year = {2013}, month = {Jan-01-2013}, pages = {111912}, issn = {00036951}, doi = {10.1063/1.4821032}, url = {http://scitation.aip.org/content/aip/journal/apl/103/11/10.1063/1.4821032}, author = {Gopinadhan, Manesh and Shao, Zhen and Liu, Yanhui and Mukherjee, Sundeep and Sekol, Ryan C. and Kumar, Golden and Taylor, ́ A. D. and Schroers, Jan and Osuji, Chinedum O.} } @article {73, title = {Improved efficiency of smooth and aligned single walled carbon nanotube/silicon hybrid solar cells}, journal = {Energy \& Environmental ScienceEnergy \& Environmental Science}, volume = {6}, number = {3}, year = {2013}, pages = {879}, isbn = {1754-5692
1754-5706}, doi = {10.1039/C2EE23716D}, author = {Li, Xiaokai and Jung, Yeonwoong and Sakimoto, Kelsey and Goh, Teng-Hooi and Reed, Mark A. and Taylor, Andr{\'e} D.} } @article {80, title = {Pd{\textendash}Ni{\textendash}Cu{\textendash}P metallic glass nanowires for methanol and ethanol oxidation in alkaline media}, journal = {International Journal of Hydrogen EnergyInternational Journal of Hydrogen Energy}, volume = {38}, number = {26}, year = {2013}, pages = {11248-11255}, isbn = {03603199}, doi = {10.1016/j.ijhydene.2013.06.017}, author = {Sekol, Ryan C. and Carmo, Marcelo and Kumar, Golden and Gittleson, Forrest and Doubek, Gustavo and Sun, Kai and Schroers, Jan and Taylor, Andr{\'e} D.} } @article {67, title = {Polymer bulk heterojunction solar cells employing F{\"o}rster resonance energy transfer}, journal = {Nature PhotonicsNature Photonics}, volume = {7}, number = {6}, year = {2013}, pages = {479-485}, isbn = {1749-4885
1749-4893}, doi = {doi:10.1038/nphoton.2013.82}, author = {Huang, Jing-Shun and Goh, Tenghooi and Li, Xiaokai and Sfeir, Matthew Y. and Bielinski, Elizabeth A. and Tomasulo, Stephanie and Lee, Minjoo L. and Hazari, Nilay and Taylor, Andr{\'e} D.} } @article {62, title = {Polymer coating of vanadium oxide nanowires to improve cathodic capacity in lithium batteries}, journal = {Journal of Materials Chemistry AJournal of Materials Chemistry A}, volume = {1}, number = {27}, year = {2013}, pages = {7979}, isbn = {2050-7488
2050-7496}, doi = {10.1039/C3TA11049D}, author = {Gittleson, Forrest S. and Hwang, Jonathan and Sekol, Ryan C. and Taylor, Andr{\'e} D.} } @article {90, title = {Stratified rod network model of electrical conductance in ultrathin polymer{\textendash}carbon nanotube multilayers}, journal = {Physical Review B}, volume = {87}, number = {19}, year = {2013}, isbn = {1098-0121
1550-235X}, doi = {http://dx.doi.org/10.1103/PhysRevB.87.195449}, author = {Zurita{\textendash}Gotor, Mauricio and Gittleson, Forrest S. and Taylor, Andr{\'e} D. and Blawzdziewicz, Jerzy} } @article {63, title = {Improving the assembly speed, quality, and tunability of thin conductive multilayers}, journal = {ACS NanoACS Nano}, volume = {6}, number = {5}, year = {2012}, note = {Gittleson, Forrest S
Kohn, David J
Li, Xiaokai
Taylor, Andre D
eng
2012/04/21 06:00
ACS Nano. 2012 May 22;6(5):3703-11. doi: 10.1021/nn204384f. Epub 2012 May 7.}, month = {May 22}, pages = {3703-11}, abstract = {While inhomogeneous thin conductive films have been sought after for their flexibility, transparency, and strength, poor control in the processing of these materials has restricted their application. The versatile layer-by-layer assembly technique allows greater control over film deposition, but even this has been hampered by the traditional dip-coating method. Here, we employ a fully automated spin-spray layer-by-layer system (SSLbL) to rapidly produce high-quality, tunable multilayer films. With bilayer deposition cycle times as low as 13 s (~50\% of previously reported) and thorough characterization of film conductance in the near percolation region, we show that SSLbL permits nanolevel control over film growth and efficient formation of a conducting network not available with other methods of multilayer deposition. The multitude of variables from spray time, to spin rate, to active drying available with SSLbL makes films generated by this technique inherently more tunable and expands the opportunity for optimization and application of composite multilayers. A comparison of several polymer-CNT systems deposited by both spin-spray and dip-coating exemplifies the potential of SSLbL assembly to allow for rapid screening of multilayer films. Ultrathin polymer-CNT multilayers assembled by SSLbL were also evaluated as lithium-ion battery electrodes, emphasizing the practical application of this technique.}, isbn = {1936-086X (Electronic)
1936-0851 (Linking)}, author = {Gittleson, F. S. and Kohn, D. J. and Li, X. and Taylor, A. D.} } @article {69, title = {Scalable fabrication of multifunctional freestanding carbon nanotube/polymer composite thin films for energy conversion}, journal = {ACS NanoACS Nano}, volume = {6}, number = {2}, year = {2012}, note = {Li, Xiaokai
Gittleson, Forrest
Carmo, Marcelo
Sekol, Ryan C
Taylor, Andre D
eng
Research Support, Non-U.S. Gov{\textquoteright}t
Research Support, U.S. Gov{\textquoteright}t, Non-P.H.S.
2012/01/13 06:00
ACS Nano. 2012 Feb 28;6(2):1347-56. doi: 10.1021/nn2041544. Epub 2012 Jan 24.}, month = {Feb 28}, pages = {1347-56}, abstract = {Translating the unique properties of individual single-walled carbon nanotubes (SWNTs) to the macroscale while simultaneously incorporating additional functionalities into composites has been stymied by inadequate assembly methods. Here we describe a technique for developing multifunctional SWNT/polymer composite thin films that provides a fundamental engineering basis to bridge the gap between their nano- and macroscale properties. Selected polymers are infiltrated into a Mayer rod coated conductive SWNT network to fabricate solar cell transparent conductive electrodes (TCEs), fuel cell membrane electrode assemblies (MEAs), and lithium ion battery electrodes. Our TCEs have an outstanding optoelectronic figure of merit sigma(dc)/sigma(ac) of 19.4 and roughness of 3.8 nm yet are also mechanically robust enough to withstand delamination, a step toward scratch resistance necessary for flexible electronics. Our MEAs show platinum utilization as high as 1550 mW/mg(Pt), demonstrating our technique{\textquoteright}s ability to integrate ionic conductivity of the polymer with electrical conductivity of the SWNTs at the Pt surface. Our battery anodes, which show reversible capacity of approximately 850 mAh/g after 15 cycles, demonstrate the integration of electrode and separator to simplify device architecture and decrease overall weight. Each of these applications demonstrates our technique{\textquoteright}s ability to maintain the conductivity of SWNT networks and their dispersion within a polymer matrix while concurrently optimizing key complementary properties of the composite. Here, we lay the foundation for the assembly of nanotubes and nanostructured components (rods, wires, particles, etc.) into macroscopic multifunctional materials using a low-cost and scalable solution-based processing technique.}, isbn = {1936-086X (Electronic)
1936-0851 (Linking)}, author = {Li, X. and Gittleson, F. and Carmo, M. and Sekol, R. C. and Taylor, A. D.} } @article {86, title = {Nanoimprinted electrodes for micro-fuel cell applications}, journal = {Journal of Power SourcesJournal of Power Sources}, volume = {171}, number = {1}, year = {2007}, pages = {218-223}, isbn = {03787753}, author = {Taylor, Andr{\'e} D. and Lucas, Brandon D. and Guo, L. Jay and Thompson, Levi T.} }